GamezWorld.de - Forum
Von Spielern für Spieler
Du bist nicht angemeldet.
Seiten: 1
Hallo an alle!
Ich habe Probleme mit meinem Brenner. Bei ca. 50% macht er einen write error. Das Problem besteht schon seit ein paar Wochen und die Rohlinge sind dannach unbrauchbar. An der Geschwindigkeit liegt es nicht und ob ich CD's oder DVD's brenne macht es auch kein Unterschied. Lesen kann ich normal. Da ich mich net so damit auskenne, habe ich einfach mal den Log gespeichert:
Manusan
1502-4130-1177-0515-9660-5227*
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programme\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 29.01.2003 22:37:36
Nero Version: 5.5.10.33
Rekorder: <DVDRW IDE1004> Version: 0040 - HA 1 TA 1 - 5.5.10.33
Adapter-Treiber: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST CD-RW GCE-8160B>Version: 1.02 - HA 1 TA 0 - 5.5.10.33
Adapter-Treiber: <atapi> HA 1
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4D080H4 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : DVDRW IDE1004 atapi Port 1 ID 1 DMA: On
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (83886080) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 767MB (785904kB)
Free physical memory: 530MB (542772kB)
Memory in use : 30 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On
18.6.2005
CD-ROM (ISO)
16:19:19 #1 Text 0 File Isodoc.cpp, Line 7576
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
16:19:19 #2 Phase 89 File dlgbrnst.cpp, Line 1655
Super Link aktiviert
16:19:20 #3 Text 0 File Reader.cpp, Line 115
Reader running
16:19:20 #4 Text 0 File Writer.cpp, Line 125
Writer DVDRW IDE1004 running
16:19:20 #5 ISO9660GEN -11 File geniso.cpp, Line 4571
First writeable address = 0 (0x00000000)
16:19:20 #6 Text 0 File Burncd.cpp, Line 3737
Turn on Track-At-Once, using CD-R/RW media
16:19:20 #7 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 76762 (76762) = #76762/17:3.37
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------
16:19:20 #8 Text 0 File DlgWaitCD.cpp, Line 222
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 76761 (17:05.36)
16:19:20 #9 Text 0 File DlgWaitCD.cpp, Line 227
Write in overburning mode: FALSE
16:19:20 #10 Text 0 File DlgWaitCD.cpp, Line 1679
Recorder: DVDRW IDE1004;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
16:19:20 #11 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder DVDRW IDE1004 for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD not fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 157515776
16:19:20 #12 Text 0 File ThreadedTransferInterface.cpp, Line 852
Removed 2 run-out blocks from end of track 1.
16:19:20 #13 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 76762 (76762) = #76762/17:3.37
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 76760 blocks [DVDRW IDE1004 ]
--------------------------------------------------------------
16:19:20 #14 Phase 24 File dlgbrnst.cpp, Line 1655
Cachen von Dateien
16:19:21 #15 Phase 25 File dlgbrnst.cpp, Line 1655
Cachen von Dateien fertig
16:19:21 #16 Phase 36 File dlgbrnst.cpp, Line 1655
Start des Brennvorganges mit 40x (6.000 KB/s)
16:19:21 #17 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
16:19:21 #18 Text 0 File Mmc.cpp, Line 18102
Set BUFE: Super Link -> ON
16:20:01 #19 SCSI -1135 File Cdrdrv.cpp, Line 1416
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x025F0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x3A 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
16:20:01 #20 DVDR -1135 File Writer.cpp, Line 333
Write error
16:20:01 #21 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion
16:20:01 #22 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader
16:20:01 #23 CDR -201 File WriterStatus.cpp, Line 194
Ungültiger Brennzustand
16:20:01 #24 TRANSFER -18 File WriterStatus.cpp, Line 194
EndTrack fehlgeschlagen
16:20:01 #25 Text 0 File Mmc.cpp, Line 13100
<DVDRW IDE1004 > start Close Session
16:20:48 #26 SCSI -1194 File Cdrdrv.cpp, Line 1212
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x04
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x04
16:20:48 #27 DVDR -1194 File WriterStatus.cpp, Line 233
Program Memory Area update failure
16:20:48 #28 TRANSFER -19 File WriterStatus.cpp, Line 233
Fixieren fehlgeschlagen
16:20:48 #29 Text 0 File WriterStatus.cpp, Line 242
falling back to disc fixation
16:20:48 #30 SCSI -1023 File Cdrdrv.cpp, Line 1212
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0012C20C
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x00
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x32 0x41 0x04 0x08 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00
16:20:48 #31 DVDR -1023 File WriterStatus.cpp, Line 233
Command sequence error
16:20:48 #32 TRANSFER -19 File WriterStatus.cpp, Line 233
Fixieren fehlgeschlagen
16:20:48 #33 SCSI -1023 File Cdrdrv.cpp, Line 1212
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0012C8D0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x00
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x32 0x01 0xC4 0x08 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00
16:20:48 #34 SCSI -1023 File Cdrdrv.cpp, Line 1212
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0012C8D0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x00
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x32 0x02 0xC4 0x08 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00
16:20:48 #35 SCSI -1023 File Cdrdrv.cpp, Line 1212
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0012C8CC
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x00
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x32 0x01 0xC4 0x08 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00
16:20:48 #36 SCSI -1023 File Cdrdrv.cpp, Line 1212
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0012C8CC
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x00
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x32 0x02 0xC4 0x08 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00
16:20:48 #37 DVDR -1023 File WriterStatus.cpp, Line 168
Command sequence error
16:20:48 #38 TRANSFER -39 File WriterStatus.cpp, Line 168
EndSession fehlgeschlagen
16:20:48 #39 Phase 38 File dlgbrnst.cpp, Line 1655
Brennvorgang nicht erfolgreich mit 40x (6.000 KB/s)
16:20:48 #40 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
16:20:58 #41 SCSI -1169 File Cdrdrv.cpp, Line 1212
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29.08.2002 01:27:50 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Es wäre net wenn mir jemand helfen könnte.
Danke - Manusan -
Offline
aehm... aaaalso:
Nur ein Brennprogramm im Einsatz? Mal nen anderes probiert?
Was allerdings auch sein kann: Laser (für CD und/oder auch der für DVD) zum brennen ist defekt - hatte ich bei nem Brenner meines Bruders - da war bei der ganzen Serie nach paar Monaten von einem Defekt auszugehen.
Um zu schauen ob's notfalls an deinem Betriebssystem bzw anderen Komponenten liegt: bau das Teil halt mal woanders ein und toaste dort nen Rohling.
bye Ron
Offline
Probier mal den Windows-Brenndienst zu deaktivieren. DAzu gehst du zur Systemsteuerung und wählts falls nötig "zur klassischen ansicht wechseln". dann gehste auf verwaltung und weiter gehts zu DIENSTE. Jetzt suchste den eintrag IMAPI-Brenndienst - rechsklickt- eigenschaften - deaktiviert.
Greez
Offline
Seiten: 1
